Can a wobbly ceiling fan fall off

Can A Wobbly Ceiling Fan Fall Off

A secured install ceiling fan will not fall for just because of wobbly. But it can occur in other accidents. So, you should fix this issue as soon as possible. Ceiling fans hang through the fan brace that is secured to a stud. A regular electrical box cannot support its weight. So the main concerning fact is how you hang your ceiling fan.

How do you understand that your ceiling fan installs correctly? A professional can do this job perfectly. If you think your fan is not installed correctly and starts to wobble, you should call an electrician. A good sign might be if you don’t face any issue after installing for several months or years.

However, a ceiling can wobble because of the bent of the blade. Also, it can happen for imbalance weight. There are some other reasons for wobbly. If you can fix these issues, there is no risk.

How to Fix a Wobbly Ceiling Fan?

To identify the actual problem, you might need different tests. But it helps you to determine who the main culprit for wobbling is. A ceiling fan consists of a lot of parts that can lose over time.

Step 1: Turn off the power.

Before checking the fan, make sure the power is turned off.

Step 2: Check the ball joint.

First, check the ball joint that hangs the fan to the fixture. If you see there is any fitting issue that can be noisy or shaky, fixes the problem.

Step 2: Check the fan box.

Check the ceiling fan box and fixture if there is any loose screw. The box should have been secured with the fan brace. Using a screwdriver, tighten all the visible screws into the fan box.

Step 3: Clean the fan blades.

A ceiling fan is a rotating component that tends to be wrapped with a lot of dust. If you cannot clean your ceiling fan after a few months letter, a thick layer of dust and dirt can imbalance the blades. So, it would be best if you cleaned your ceiling fan regularly. Typically, three times in a year is enough.

The ceiling fan’s cleaning component makes your job easier. A pillowcase might be an ideal solution for cleaning fan blades. You need a step ladder if you want to clean using a pillowcase. Besides, you will find a ceiling fan cleaning brush that will be another easy solution.

Step 4: Tighten all the screws.

Check all the screws secured the blades with the fan body. Check downrod screws and tighten them. Next, look at the light fixture and notice if there is an issue. Make sure the light kit is tightened firmly. Then check the fan wobbly is improved or not. If not, follow the next step.

Step 5: Check the fan blades.

After checking everything is fine, the issue is more likely to be a slightly bent fan blade.

To find out this problem, you need to measure the fan blades’ distance from the ceiling. Take a measurement tape, hold it at the end of the edge and take measurements to form the ceiling. Take note of the distance and repeat this process for each blade. If you find any difference in the measure, you need to fix the bent blade.

A new fan blade holder could be the easiest way to fix it. You can buy and replace every single one. Though, it is easiest why but not the cheapest way.

Step 6: Purchase a ceiling fan balancing kit.

A balancing kit is a couple of piece of weight that helps you to balance the fan blade. First of all, you have to mark each blade by numbering or symbol. This is a crucial step because you’ll need a way to track your progress as you go through each blade.

Attach a balancing kit with one blade and turn on the fan to see any improvement. If not, apply the same process with each blade until you identify the blades that need extra weight.

After founding the imbalance blade, keep the weight kit with that blade, and you use the second weight if the first weight is not enough for smooth balancing.

Step 7: Replace your fan.

Keep in mind that if your fan is more than ten years old, other mechanical issues may have occurred, and you should consider replacing it.

Final verdict:

Always install a ceiling fan by a professional who has enough knowledge. You cannot pass the safety risk without installing firmly. Wobbly is not a good sign of a ceiling fan, so don’t take it as simple. Besides, a wobbly fan cannot produce enough airflow and creates annoying noise.

Leave a Comment

Your email address will not be published.