How hard is it to replace a ceiling fan

How Hard Is It To Replace A Ceiling Fan

People typically don’t want to install a ceiling fan by themselves, especially those who are not DIYer. So, they have been planned to install by a licensed person, and when they ask about the installation cost, they are shocked. Because sometimes, it is cross their fan prices.

Eventually, they search online: is it hard to install a ceiling fan? The answer might vary depending on your situation. If already you have pre-wired, it is actually not so hard as you might think.

A technician can tell you you should not install it, and if you install it and if it causes a fire, the insurance company will not cover any damage. But the question is, why do most people install a fan by themselves? The answer is it is not hard, and if you know the actual process, you can do it easily.

But we recommend you, if you have any handyman in your family or neighbors, take help from them. And when you know how to wire, you can do this without any risk.

Do you need an electrician to install a ceiling fan?

Anyone who has a ceiling fan in their home can install it themselves, but hiring an electrician to do the job is a great idea if you’re not comfortable doing so. You have to be careful when installing a ceiling fan, as not all ceilings are the same. You should also have a good look at your home’s wiring before installing a ceiling fan, as some fans require specific fittings for this purpose.

How much should an electrician charge install a ceiling fan?

Ceiling fans are a great investment in a home. They provide a much cooler room in the summer and a much warmer one in the winter. They also increase the value of your home when you go to sell it. When done by a professional electrician, the right ceiling fan installation cost will be between 100 to 500 dollars. If they don’t need to run wiring and have a ceiling fan bracket, they can ask between 100 to 150. However, if you already have a fan and are going to update or replace it, you can do it yourself.

How to replace a ceiling fan?

Step 1: Removing the Old Fan

Installing a ceiling fan in your home is not an overly complicated project. The most important thing to do before beginning is to prepare the space. It’s important to flip the power off at the breaker box. Before you take out the old fan, make sure to disconnect the wires and test the connections.

Now you need to remove your ceiling fan part by part. If your fan does not have a light fixture and is not flush mounted, you can take it down at once. Just lose the canopy and disconnect the wire connection, and then take it down. But it is better to remove the fan blades before taking down the fan body.

A ceiling fan with a light fixture must first remove the light bulb, light cover, and fixture. And then remove the fan blades and other parts. Before disconnecting any wiring, take a note or capture a photo for further reconnecting.

If your ceiling fan comes with a bracket for perfect fitting, you can remove the old bracket. Or you can keep the old one if it is ok for your new fan.

Step 2: Assemble your new fan

First of all, install the new bracket that comes with your new fan. Feed the wire inside the box through the bracket. Tighten all the screws and make sure the bracket is secured for hanging your fan.

Now keep the fan body on the floor, feed the cable through the canopy, then through the downrod hole, and then you need to secure the rod with the fan body. You have to attach it perfectly; otherwise, it may wobble.

Now you can hang your fan with the bracket. After hanging the fan, you need to finish the wiring. Strip the wire using a wire stripper and make sure the wire is long enough for connection with the ceiling wires. After connecting the wire, use wire nuts to secure them. If you don’t know how to wire a fan, see this diagram.

And finally, connect all the other parts of the fan. And before starting the fan, recheck all the visible screws again and tighten them.

Final verdict:

Replacing a ceiling fan can be tricky. If you have no prior experience and don’t know the right tools, it will be more challenging. Manage all the necessary tools and also watch some YouTube videos to be precise. Also, don’t forget to read the user manual that comes with your new fan.

Leave a Comment

Your email address will not be published.