Ceiling fan becomes the most popular cooling equipment because it consumes less energy than any other home cooling appliance. It is essential in both winter and summer. But when it comes to installing without a stud, people think it’s quite difficult. The installation is not as straightforward, as hanging the fan on the previous electric box is not enough to support its extra weight. But actually not like that if you know what to do.
There is an easy option if you wonder how to hang a ceiling fan in a drywall ceiling where no electrical box exists. Maybe you choose a spot where you want to install a fan, but you don’t know where the wooden beam is. In that case, a stud finder can make your job easier. You’ll need a ceiling fan brace to hang a fan without a stud that can provide strong support to mount a ceiling fan.
If you are not clear, read step by step guidelines on how to hang a ceiling fan without studs.
Select an ideal location for installing the fan.
You’ve most likely looked at several new fans in a local store or online, or you’ve already purchased one. However, please read the instruction manual to make sure where it can be installed. Typically, people choose the centre of a room to install a ceiling fan above the bed or near the sofa. However, make sure there is no obstacle. Take enough clearance from the door and other furniture.
Besides, your fan can contain other components like crystals, light fixtures, and light bulbs. So you have to be more careful about selecting a spot. After selecting a point, mark it.
Can a drywall ceiling support a ceiling fan?
No, a drywall ceiling can’t support a ceiling fan. This is not strong enough to support a heavy ceiling fan. So, it would be best if you had a beam or two joists to install a fan. But for a drywall ceiling, you can’t see any stud inside the ceiling from the outside. But, to install a fan, you must locate the stud.
If you’ve chosen a location for your fan but it’s between studs, it’s still possible. And, if we can’t see the studs inside the drywall ceiling, how you can find them? A stud finder, which uses magnetism to locate metal will be helpful for you.
How to use a stud finder?
It is very easy to use. Place the stud finder on the one end of the ceiling and slowly move, and before that, turn on the finder switch. Now slowly move the tool horizontally with the wall; when it comes to the exact location of the stud’s outside edge, the light will be on that indicates one side of the stud. Also, make sure the device is calibrated.
Mark the outer age of each stud with a marker or pencil. Typically, the stud runs parallel with the wall. So, you can use common sense to figure out the studs, such as left to right or forward and backward. After finding two joists, you need to purchase a ceiling fan brace to install a fan.
How to install a ceiling fan brace?
Step 1: Purchase a new fan brace.
A fan brace is an extendable rod that is specially made for installing between two ceiling studs. Purchase a fan brace with a fan box from a local or online shop.
Step 2: Turn off the power.
Please turn off the power and make sure it’s off with a non-contact voltage tester.
Step 3: Cut the hole.
Place the fan box at your selected spot and trace around it with a marker/pencil. Cut around the hole using a drywall saw, and make sure you cut the right size.
Step 4: Install the fan brace.
Slip the brace into the ceiling and centre it over the hole. Turn the shaft by hand to lock it between the joists. Make sure the rod is tightened enough. The brace is designed with metal teeth/spikes on both sides that will be digging into the wooded stud when you twist the bar.
You need to slip the saddle over the brace and feed the cable into the new box. Fasten the box to the saddle, and you’re ready to hang your new ceiling fan with no worries.
Hopefully, we’ve eliminated the confusion about installing a ceiling fan with no stud or between two studs. Without investing huge money, you can simply hang your fan using a special brace and box.