Have you ever noticed that some ceiling fans seem more powerful than others, even though the blades move at the same speed? There are many factors behind the low airflow of a ceiling fan.
Ceiling fans have many advantages. The main advantage is comfort, and they can also provide a cool breeze to help you sleep better. They are also good for the environment because they use less energy. In addition, a ceiling fan can add style to any room in your home. They also keep the room cooler during the summer and warmer during the winter.
A ceiling fan speed controller is a great way to increase the power and speed of your ceiling fan. A fan speed controller will allow you to adjust the speed of your fan while the fan is running. It’s an easy way to change the speed of your fan, and most fans come with three different speeds settings. But if you feel you can not produce enough CFM at maximum speed, you should check some basic things.
Ceiling Fan Speeds are measured in RPM. The higher the RPM, the faster the fan will spin. This article will help you to elaborate on the true potential of your ceiling fan. Probably, you don’t need to buy a new ceiling fan. Let’s take a look.
Method 1: Wipe the Fan Blades.
Have you noticed how quickly the ceiling fan blades on your fan are spinning? Have you tried to increase the speed, but it doesn’t work? By cleaning the fan blades, ceiling fan speed might be improved. Sometimes fan speed can fall for many days, not to clean.
To clean the blades of a ceiling fan, use a dry cloth to wipe down the blades. You can also use a pillowcase that will protect your room from being dirty. Some methods for cleaning ceiling fan blades are to use a vacuum cleaner with an upholstery attachment or to use a wet washcloth to remove dust.
Method 2: Check all the screws.
Most people are unaware that ceiling fans can be loose. If the fan is not blowing as hard as it should, this could be because the blades are loose. If your ceiling fan blades are clean or after cleaning, you don’t see any improvement, and you should check all the screws of your ceiling fan.
If fan blades are damaged slightly, you should call a professional who can repair them, or you can change blades. If you see all the blades look good, set up a step ladder to reach the fan and check all the visible screws. If you find any loose screws or nuts, tighten them and again turn on the fan and see seed increase or not.
Method 3: Lubrication
Ceiling fans can be lubricated by adding some oil to the bearings. Depending on how often you use it, you may do this every few months or after each season.
Some fan needs manual lubrication. At the top of the housing, you will find a small house that may be marked as an oil hole. Top up the oil. You will find fan oils that are specially made for ceiling fans, and you should not use general oil in the ceiling fan.
Method 4: Replace bad capacitor.
Ceiling fans are electrical appliances that work by using an electric motor to generate airflow. Many speed issues can happen with a ceiling fan, and one of the most common problems is a bad capacitor. If your ceiling fan speeds up and slows down sporadically, it could be because of a bad capacitor. The speed of the fan can also be affected by a bad capacitor.
Replacing a bad capacitor is not hard and can be done in a few minutes. To check the existing capacitor, first, remove it from the fan and then use a multimeter. If the capacitance is the same as what is written on the capacitor, it is good; however, if the capacitance value is low, it is time to replace it.
Method 5: Change the Motor.
After checking all the methods, if the speed does not increase, probably the problem with the motor. Wrong motor winding causes low spin. In that cases, call a professional who can rewind motors.
The speed of the blades can be increased in different ways, but one common method is to make the blades larger in diameter. This will cause more air to be pulled in, increasing the fan’s airflow. If you want to do this, you have to make sure the fan motor is very powerful to rotate larger blades.