If you have a ceiling fan with light but are not bright enough in your space, this article is for you. Most of the ceiling fans are equipped with lights, but all the lights are not bright enough, and they have a wattage limit.
If your ceiling fan light is controllable, make sure you select the maximum brightness. But when the maximum brightness is also low, then you should check the wattage limiter. A wattage limiter is installed in some fans. Its goal is to cut off excess wattage and limit it to a certain level. However, this device may cause your lights to dim. Remove this device if you can, or contact an electrician.
What you need to know:
Most people think more wattage means more light. Brightness depends on the lumens. Two light bulbs may have the same wattage but different lumen. Check the lumen of your present bulb and go to the store to buy a higher lumen bulb.
Ways to Improve Ceiling Fan Lighting:
Method 1: The Remote Control.
Some people do not know or notice the remote can control the brightness of the ceiling fan light. There is the most possibility of having dimmable features if your ceiling fan comes with remote control. Sometimes manufacturers do not mention this function in their user manual.
Now the question is how to adjust brightness. It can be different from manufacturers to manufacturers. Press and hold down the light button for a few seconds and see the brightness change or not.
If it doesn’t work for you, try holding the on/off button down for a few seconds. Before buying new bulbs or checking advance issues, you need to experiment a little with your remote control.
Method 2: Replace the Bulbs.
If there is no issue with the remote, you can replace the light bulb for increasing brightness. Many people use 40W filament light bulbs, and they do not have enough light. Filament bulbs have a wire in the middle and are the most common type of bulb. They aren’t particularly bright, but they do consume the most energy.
If your ceiling fan has a wattage limiter, don’t freak out. Within your limits, you can improve brightness. The brightness of light bulbs depends on lumens, not watts. Basically, you’re looking for a light bulb with a higher lumen output.
For example, from a 4 watts LED bulb, you can get 250 lumens. On the contrary, from a 25 watts regular bulb, you can get the same light. So, you can replace your old light bulb with new high lumens LED bulb.
Method 3: The Wattage Limiter.
A wattage limiter is a device that limits the power input to an appliance. This is used in order to prevent overloading the circuit. A wattage limiter can help prevent damage to an appliance if used on an overloaded circuit. In order to prevent damage, the device limits the power consumption to a safe level.
After installing a high-lumen LED, you can remove the wattage limiter if you do not get your desired brightness in your space. Most electricians and handymen said in different forums that removing wattage limiters is not dangerous for your fan.
It is not a difficult job, and you do not need any special tools. Typically this device is connected between the pull chain switch and light source. You have to connect the pull switch directly to the light source. You can use a wire nut for this purpose, but it is recommended to use proper electrical connectors.
Why is my ceiling fan light not very bright?
Often, the brightness of a ceiling fan light is determined by how many light bulbs are installed. If you have more than one bulb in your fixture, try removing a few and see the lumen. A higher lumen LED light bulb can provide you more brightness.
How to adjust the brightness of light bulbs?
If the lighting is too bright, you can use a dimmer switch to control the intensity of your lights. A dimmer lets you adjust the light level by turning the dial to increase or decrease the output. If your ceiling fan already has a dimmer, make sure it is set at the lowest setting.
Most ceiling fans are designed with a light fixture, but sometimes the light doesn’t provide enough brightness to be useful. This is especially true when you are trying to light up a large room or have otherwise inadequate lighting. You can try the above method that can solve your problem.