how to wire a ceiling fan with two switches

How to wire a ceiling fan with two switches

Ceiling fan wearing seems to be a daunting task to many people. However, after following our step-by-step guidelines, you will be confident in wiring your ceiling fan. This is not a challenging project, but it will be pretty complex if you need to run wiring through the wall.

Before wearing a ceiling fan, you need to make sure how you want to control your ceiling fan. If you would like to keep two separate switches for operating fan and light, this article is for you.

Let’s take a look at how to wire a ceiling fan with two switches.

Step 1: Turn off the power.

Open the circuit breaker from the breaker box. Find out the breaker for the room where you are going to work. Once you get the right switch, please keep it in the off position.

Step 2: Follow the instruction manual.

Read carefully the fans instruction manual that comes with your ceiling fan. Some fan models might have special wiring instructions before installing it. So you should read the entire manual to be sure that you are on the right track.

Step 3: Familiar with the individual wires.

Now you need to be familiar with the wires that come from the ceiling. There you will find four colors of wire: black white, green, yellow. You also find blue air that generally powers the light.

You will find two switches on your wall if you have a blue and black wire hanging from your ceiling. Your neutral wire is white, and your grounded wire is copper, and the black wire powers your fan. Because they carry electrical current, the black and blue wires are referred to as hot wires.

Step 4: Identify the fan wire.

A green, white, and black wire should come out from the top of your fan. A blue wire will be present if your fan has a light. A green grounding wire should also be attached to the fan bracket itself.

Step 5: Attached the fan bracket.

Before tightening the bracket, pull out cables that come from the ceiling through the center of the bracket. Make sure all the wires are hanging freely.

Position the ceiling fan bracket with the hole and then tighten the screw. Make sure all screws are tight enough; otherwise, your ceiling fan might be wobbly during its running.

Step 6: Hang the fan in the bracket.

Hang the ceiling fan by sliding the top into the groove in the bracket. Fans come in various configurations and brackets, but all modern fans allow you to hang the fan on the bracket that makes it easier to wiring.

Step 7: Strip the ends of the wires.

Now you need to expose the copper end of the wire. Use a wire stripper to do this job. Strip about 1.5 inches at the end of the wire. If the wire is already exposed, you can skip this part.

Step 8: Twist blue and black wire.

Now you need to wire your ceiling fan with two separate switches. So, you need to install two wall switches and running wires from the wall to the fan fixture box. 6 wires will come from two switches of light and fan. First, connect the blue wire to the black wire that comes from the light switch.

Step 9: Connect fan power wire.

You will find a black wire coming out from the ceiling fan. Connect it with the black wire that comes from the fan switch.

Step 10: Connect neutral wire.

You will find two white neutral wires. One comes from the ceiling and another from the ceiling fan, connecting them together and secured with the wire nut.

Step 11: Connect all ground wires.

There are four ground wires: one from the ceiling fan, one from the ceiling, one from the fan switch, and another from the light switch. Connect all of them together, twist them, and secured them with the wire nut.

Step 12: Supply power to the switch.

This is the final step. Now you need to connect the phase line to both switches. Connect two black wires of the fan and light switch with the black wire from the ceiling.

Step 13: Tuck all the connected wires into the bracket.

After finishing the wiring and securing them, tuck them into the ceiling fan bracket.

Step 14: Turn on the power.

Now you can turn on the power and check the fan works or not. If you face any problem or if you are not confident in wiring, you should call an electrician to complete the process.

Final Verdict.

Ceiling fan wiring is not a complicated project. If you follow the user manual, you can do it easily. Since the ceiling fan is the most commonly used home equipment, you should try to do it by yourself. If you have a clear concept of wiring and some basic tools, you can install a ceiling fan with wiring.

Leave a Comment

Your email address will not be published.